<< back to
Pistons
HONDA |
KAWASAKI | SUZUKI
| YAMAHA
We sell sleeves for ALL MOTORCYCLES!
CUSTOM SLEEVES welcome!!
If you don't see what you need,
we would be happy to make them for you!
Please
contact us for information.
**Sleeves are made to order and in
most cases cannot be returned**
NOTE: Sleeves will need to be
installed and then bored and honed to the proper size. Sleeves do not come
pre-bored and honed. If you are installing oversize sleeves the cylinder
block & engine cases will also need to be bored to the correct size for the
larger sleeves before installation. The cylinder may need to be lightly surfaced
after new sleeves are installed. We highly recommend that all of this work be
performed by a qualified motorcycle machine shop!
Tech sheet for interference fit
sleeve installation
Updated 1/8/2024
HONDA
Model |
Specs |
Part # |
|
CB500 1971-73 |
CB500
|
56mm
498-572cc bores
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit |
DP SLV3679FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB550 1974-78 |
|
|
|
CB550
|
58.5 to
61mm
550-592cc bores
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit |
DP SLV3659FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
NT650GT HAWK |
NT650GT Hawk 1988-90 |
80 to 82mm
663cc to
696cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3411FA |
$149.95 each
Sold in sets of (2)
|
CB750 SOHC |
|
|
|
CB750 SOHC 1969-78
|
61 to
65mm
736cc stock bore to 836cc
DP62/r
DP836/65f2
JE 836cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP
SLV3618FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us |
CB750 SOHC 1969-78
|
64-65mm
811-836cc bores
836cc Turbo Pistons
DUCTILE IRON SLEEVES
Over 3 times stronger than stock sleeves at
100,000 PSI tensile strength! Simple
installation, no cylinder block or case boring
required. Thin-wall design for maximum heat
dissipation and less weight.
Recommended for use with supercharged,
turbocharged, and NOS engines.
Other custom sizes available.
Proudly
Made in the USA
from the finest available materials. This is a
special order item that takes 3 to 6 weeks production time.
Interference Fit
|
DP SLV5570Z |
Please email us for current price and availability |
CB750 SOHC 1969-78
|
67 to 68mm
890-906-915cc bores
(69-76)
or 77-78 F2
Case boring required.
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit
|
DP SLV5560Z |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB750 SOHC 1969-78
|
67mm Tapered Sleeve
890cc bore
Case boring NOT required
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit
|
DP SLV5914Z |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB750 SOHC 1969-78
|
70-72.5mm
1026-1000-970cc bores
DP970/70f2
Made to order, please allow 1 to 4 weeks.
Case boring required
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV5362Z |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB750 SOHC 1969-78 |
73mm and up Custom Sleeves
also available!
Email us with
your specs for availability and quote.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
|
|
CB750 / 900 / 1100 DOHC 1979-83 |
CB750 DOHC 1979-82
|
62 to
65mm
Stock bore to 835cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit
|
DP SLV3673FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB750 DOHC
1979-82
|
67mm
For use with K985 piston kit to
make CB750 into an 890cc bore.
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit
|
DP SLV5755Z |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB900F 1981-82
|
67.5 - 69.5mm
up to 988 - 1032cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3081FA
|
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB900F
1981-82
|
64.5mm
Stock to 985cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit
|
DP SLV3569FA
|
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB1000
1983
|
67mm |
email for information
|
|
CB1100 F 1983
|
70mm
Stock bore to 1123cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact tolerances (not
imported or offshore iron).
Interference Fit
|
DP SLV5288Y |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
CB1100 F 1983
|
big block |
email for information |
|
CB-x 1979-82
|
64.5mm |
email for information |
|
KAWASAKI
Please
contact us to price and order
sleeves. CUSTOM sizes available!!
Model |
SPECIFICATIONS |
Part # |
GPZ, KZ750 Stock
1980-85 |
|
email for information |
|
GPZ, 900 Ninja
Stock 1984-86 |
|
email for information |
|
KZ900 |
70 to 72mm
Bore Size
1015 - 1075cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3029FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
KZ900 & Z-1 1973-75 |
72 to 76mm
Bore size
1075 - 1197cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV5649Z |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
KZ1000 1977-80
|
70 to 72mm
Bore Size
1015-1075cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP
SLV3099FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
KZ1000J 1981-83
|
70 to 73mm
Bore Size
1075-1100cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3677FA
|
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
KZ1000 1976-80 |
71 to 77mm
Bore Size
1045 - 1200cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3030FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
KZ1000 1976-80
GPZ1100 1983-84
|
76 to 79mm
Bore Size 1200-1260cc
Sleeve OD 3.275"
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3010FA
|
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
KZ1000
1976-80
GPZ1100 1983-84 |
80 to 83.5mm
Bore Size
1327-1428cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP
SLV3031FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us |
SUZUKI
Please
contact us to price and order
sleeves. CUSTOM sizes available!!
Model |
Specifications |
Part # |
|
GS1000
1978-82 |
70-73mm ID
Stock bore to 1085cc
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3721FA |
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us |
GS1000, GS1100, GS1150 |
76-79mm
ID
Sleeve OD 3.275"
Made to order, please allow 1 to 4 weeks.
Made from finest quality USA-made cast iron, machined to exact
tolerances (not imported or offshore iron).
Interference Fit
|
DP SLV3010FA
|
$109.95 each
Sold in sets of (4)
Single sleeve available
for $175.00 email us
|
GS1100
1979-85,
Overbore to 1260cc |
|
email for information |
|
GS1100, GS1150
82-83mm |
|
email for information |
|
GS1100, GS1150 85mm |
|
email for information |
|
GS1150 Stock |
|
email for information |
|
GS1100, Overbore
1463-1568cc |
|
email for information |
|
GSXR1100 1989-92 |
|
email for information |
|
GSXR1100
1993-98 Overbore 1192-1198cc |
|
email for information |
|
YAMAHA
Please
contact us to price and order
sleeves. CUSTOM sizes available!!
|